Guide

How to select boot device on APU Entry Level

Instructions

  1. Connect via cross serial cable the firewall to the PC.
  2. Open PuTTY, go to Serial section and set the following parameters:
    • Baud rate: 115200
    • Data: 8 bit
    • Parity: None
    • Stop: 1 bit
    • Flow control: None
  3. Click on “Open“; will connect with the firewall.
  4. Press F12 to select a different boot device.
  ti posso interessare anche
  • WordPress Appliance - Powered by TurnKey Linux